Відео

The fan on those computers is on all the time there is a chance of failure... buy a fanless computer instead

Oh nice, I just found a Dell Wyze 5070 for $35 shipped! Yes, WITH the power brick. 4GB RAM (fine) and 32GB emmc (perfectly fine to start, may upgrade or slap a USB drive on there to expand)

Do I have to use the chime ? Prefer my regular doorbell to used

Im using alexa as my zigbee hub but the remote control doesn't work

Thank you for the video! I am using this and am confused about your dashboard reporting. You say the numbers mean Shipped > Out for Delivery > Delivered. However, in the documentation for the Mail & Packages integration, it specifically says that it ONLY reports packages that are either going to be delivered that day OR have been delivered that day. Those are the last 2 states of your 3-state count. So what, then, is the first state "shipped" counting? I would think this would mean shipped by the carrier and arriving in a few days, but according to the integration, that is not reported. Thanks!!

If you are using RLN8-410 with Reolink cameras. Can you still connect those same cameras into Frigate software as well, or does RLN "consume" the cameras fully? As Reolink mobile notifications are not as good as I'd hope, I'd wish to use Frigate only for the notifications.

Just a shame you didn't give a proper demo to highlight the long complained about drawback to this doorbell and that it has no seperate notifications to any other Reolink cams you have on your system and that you have to tap several times through the app to view (as with other Reolink cams on you system). Its sort of ok if it's your only Reolink product but other than that there are many better out there. Still at least you got to talk about your sponsor for a bit.

7:11 Animorphs.

Great information - thanks

I do not recommend Wyze cameras, do not be fooled, when you buy this camera you have to pay a monthly fee, because if you do not pay monthly, it will only take photos. especially the Wyze V4.

Thank you!

Can we have all that in English now, please? 😵‍💫😄

Hi, thanks for the video. Today 19jun24 last 2 Service API are not free and disabled :)

3 years old and this still helps! Thanks for a well explained walk through. I've managed to run a REST API call to build a Sensor in HA using your details and newly updated HA docs on REST sensors.

Using Home Assistant it’s an easy setup to have the Reolink Doorbell, or any Reolink camera, take a snapshot image when it sees vehicle/person/ pet/visitor and send that snapshot to your iPhone and Apple Watch. So you are not only notified someone is there but get an image of who it is. Other doorbells may do this as well but Reolink made it easy.

I tried three times scanning code and it is not linking accounts!!!

Hi , do the video can be streamed in Google home device ?

Sadly, if any of you devices are streaming the live video from the doorbell, the auto reply is disabled.

super video - thank you.

Anyone knows if it is possible to add Xiaomi cameras to the M3 hub?

why would you not wana mow your lawn are you that lazy ? liking those grab handles and muffin rings, have a hard time seeing you budy? giving up your last mandatory excersize?

The problem is with crazy recording function

Hello. Do you have experienced any problem with installing Add-on on this type of HAOS installation, because I have? Virtually, no matter what I do, a finish with message: "AddonManager.install blocked from execution, no host Internet connection". My system is installed like you suggest in this video on HP EliteDesk 800 G2 Mini with i5, yesterday, so it is up-to-date version. Then I found this commands: ha su repair ha core rebuild ha host reboot tha help me to instal one. Only one Add-on (Advanced SSH & Web Terminal) and after that, above message was back, now stay there, no matter what I done, including above commands, so, the problem is not with network or Internet, because this was not changed at all during this attempts in any aspect. Do you have any idea what I can do to solve this problem?

Hello i have a problem, the tuya doesnt detect any devices therefore i have tu add it manually but i dont know the devices ip adress (Host) :/ where i can find it?

Disappointing that you didn't cover the issues with this device as there's multiple. Calls into question your honesty and integrity when almost every other reviewer did so.

Too bad they didn't open the M3 to Third Party Zigbee devices...

I'm using the Xiaomi Miot Auto integration. Will this still work?

It would be if the ZigBee radio supported third party devices. I emailed Aqara and they said they have no plans to support third party Zigbee devices. Very disappointing.

To bad reolink doesn't play well with blueiris.

So I an wondering how hard Is it to get the m3 hub IR blaster to work with home assistant Like being able to control IR devices through the hub using home assistant

MAKE SURE TO GRAB THE FATHER'S DAY DEALS!!! Use promo code: USFATHDA (for extra 10% OFF from 6.10 until 6.16) - Aqara Smart Hub M3: amzn.to/3RnmHyC - Aqara Smart Lock U50: amzn.to/45jiBgT Use promo code: USCAFDPM (for extra 5% OFF from 6.10 until 6.16) - Aqara Presence Sensor FP2: amzn.to/4chTrkR

Nice job covering this. I appreciate the work by you and Aqara. I have the M3 and am looking forward to seeing more videos covering using Matter devices with the M3 and the other way around, plus examples of local automations. In other words, I'd like to see more of the advanced features actually working. Thanks again...

Would these lights work without a home bridge?

Does the round circle ringing button light up when records motion detection or only if pressed? Is there option to turn off the light and only have it light up if pressed? Thanks

We love ours ❤

this thing has a lot of features that i simply don't need. if i ever need an outdoor light, i'll go for something more cost-effective.

This lock looks really great and can solve the annoyance of forgetting my keys.😃

Can you test some smart plugs? They would be accommodating for transforming a home into a smart one.

This vacuum cleaner is really good, I have one at home too.

Just an FYI those push connectors are not rated for outdoor use

Waiting for mine to come. Can't wait

Nice review! I bought these for my friend, and he LOVES them!!!

Great review..I've got a bunch of Govee products and was thinking of getting these. Wondering if you could answer a question. I want to use these to replace two exterior door lights. If I was to set them at a white color/brightness setting in the app, then turn them off using the inside wall switch will they turn back on at the same setting? We use the switch on the wall alot this location. Thanks for any help and keep up the good work!

2024 still working. Thanks for your help and this method!

What happens if camera goes out of range from WiFi or if camera is broken or stolen? Is the footage gone since it’s using onboard storage ?

How do the cameras stay charged? Does the Ethernet cable charge it? Are any batteries required?

They're both just 2k. Must just decided since its 2560 that they could use 2.5K and technically wouldn't be lying.

I was just posting about the glitches but decided to read the comments. Looks like others have it covered. It is weird that is it happening. I am wondering if you tried saving it with a different codec before uploading, if that would help?

Great video! I’m trying to integrate the J7 into HA. The few sets of instructions I’ve found are very complicated and require JS and Python. Please show us an easier way to retrieve its password and complete the integration.

How many times can it charge before you need a new battery?